“An excellent book!”  — Paul Wilmott Principles of quantitative development Also discovered that the Trailing Arm has a bad case of Tin Worm. Agghh !!!…

“An excellent book!”  — Paul Wilmott Principles of quantitative development Decided to check the Left Rear Trailing Arm Mount on the van (after repairing the Right Rear) and found it to be on the brink of collapse as well….

Get Them Here: Use Eastwood Magnetic Copper Backers as a hands-free backing support when butt welding and when welding holes in sheet metal to prevent warping and weld burn-through. Welding material will not stick to the 1/8 thick copper plates which attach to the steel with high-strength, high-heat magnets. See them in-action in this video. [...]

Fitted the Rear Right Quarter Panel, Wheel Arch and Right Side Sill Panel….

Using 3M 8115 Panel Bond Adhesive…

Get Deluxe Kit Here: Eastwood’s Deluxe Body Solder Kit has more of what you need to fill with better adhesion, strength and durability than plastic fillers. No need to use lead solder as a body filler when you can use our stronger, safer, more durable, lead-free version! Our deluxe kit has all the supplies you [...]

Part 4…

Here’s a series of video’s showing the repair of the chassis outrigger, which broke off and the fitting of a new swingarm, which is full of Tin-Worm. Also I will be replacing the Right Rear Wheel Arch Panel and the lower right Sill Panel….

Part 2…

New video and update plus more to come…. Thank you to all……