The Unreal Universe A Book on Physics and Philosophy “For thinking laymen.” Have been really busy with the camper. Finished ALL the chassis work. Van now undersealed, sill repaired and fully road worthy. Still a rake of work to do before she’s ready for paint, but as a much needed reward, went on a short [...]

The Unreal Universe A Book on Physics and Philosophy “For thinking laymen.” The Van takes its own weight, yipee !!!…

Welded and Painted the Suspension Turret and painted a few other areas….

Welded up the rear of the wheel arch box thingy and started on the Suspension Turret….

A short video showing me machining a 4mm mild steel plate (for the T25), down to 2mm, using a Chester Model B Super 3 in 1 Lathe, Milling Machine, Pillar Drill….

Also discovered that the Trailing Arm has a bad case of Tin Worm. Agghh !!!…

Decided to check the Left Rear Trailing Arm Mount on the van (after repairing the Right Rear) and found it to be on the brink of collapse as well….

Get Them Here: Use Eastwood Magnetic Copper Backers as a hands-free backing support when butt welding and when welding holes in sheet metal to prevent warping and weld burn-through. Welding material will not stick to the 1/8 thick copper plates which attach to the steel with high-strength, high-heat magnets. See them in-action in this video. [...]

Fitted the Rear Right Quarter Panel, Wheel Arch and Right Side Sill Panel….

Today I began preparing to fit the right-rear wheel-arch panel….