Comments for Ignition Force

Comment on How to do a Compression Test by Frank

Frank — Fri, 18 May 2012 08:26:32 +0000

The site bmicalc.org is a web tool for accurate BMI estimation. The site includes BMI calculator, BMI calculator for children, BMI calculator for women, other calculators for accurate determination of Body Mass Index and not only. All results of calculations are followed by detailed description.

Comment on Candy Apple Red Test Panel and Blocking Update by sanchtech

sanchtech — Mon, 07 May 2012 16:04:04 +0000

that color looks good. Be mindful, lows like the one in the rear quarter is still there even though it’s blocked out. If you have enough primer on it guide coat it again and again if you have enough primer on it. Doing that a couple times will minimize it and you’ll notice it blocking out faster each time.

Comment on Candy Apple Red Test Panel and Blocking Update by cecil6711

cecil6711 — Mon, 07 May 2012 16:02:47 +0000

Not quite yet,possibly tomorrow,still blocking glazing putty on the front bumper.
Have a good one.

Comment on Candy Apple Red Test Panel and Blocking Update by ziggassedup

ziggassedup — Mon, 07 May 2012 15:57:38 +0000

G’day…candy looks good from here.

Comment on Candy Apple Red Test Panel and Blocking Update by turbocobra

turbocobra — Mon, 07 May 2012 15:56:28 +0000

Yes, it works good for fine grit sand paper. At 320 grit and up it really clogs fast. A red scotch bright will also work well to get the areas that build up that the brush wont’ get off. Make about 5-10 strokes, then brush it off… I learned it from someone elses Channel Thanks for watching…

Comment on Candy Apple Red Test Panel and Blocking Update by turbocobra

turbocobra — Mon, 07 May 2012 15:54:40 +0000

Still had some 400 on the file board, so just guide coated and went over that area, sure enough there is the low again. So guide coated and went to 220, sanded for a while, and it epoxy on both size of the low… so going to glaze it and spot prime… Good catch sir!

Comment on Candy Apple Red Test Panel and Blocking Update by turbocobra

turbocobra — Mon, 07 May 2012 15:51:40 +0000

What is wierd is quarter has been blocked out at lest twice, and didn’t notice the low there. It has quite a bit of material left on it, so will do as you suggest and block it out again. Didn’t realize it would still be there, thought once you sand it out it’s gone… Great tip!

Comment on Candy Apple Red Test Panel and Blocking Update by turbocobra

turbocobra — Mon, 07 May 2012 15:51:35 +0000

Thanks man,.. oh yea it’s close now!

Comment on Candy Apple Red Test Panel and Blocking Update by turbocobra

turbocobra — Mon, 07 May 2012 15:47:42 +0000

Thank you sir!

Comment on Candy Apple Red Test Panel and Blocking Update by turbocobra

turbocobra — Mon, 07 May 2012 15:45:30 +0000

Going out to guide coat and try it again now! Will go 240, then back to 320, 400. Going to do 600 at the very end… Thanks Henry!